Two Pod Mod Systems People Can’t Stop Talking About

0
2826

EightVape is an online vape shop offering a large selection of electronic cigarettes, e-liquids, and accessories. Today, we present two very popular pod mod systems that have sold extremely well. Bothproduce flavorful vapor, decent lifespan of their coils, and can use both Nic-Salt and regular e-liquids. Having reviewed both pod mod systems, we can honestly say either one, or both, will serve your pod mod needs very well

 

The Specs:

 Vaporesso Target PM80 Pod Mod Kit Features:

  • AXON Chipset
  • Dimensions – 102mm by 24.8mm by 33.4mm
  • Integrated 2000mAh Rechargeable Battery
  • Intelligent Wattage Detection
  • Wattage Output Range: 5-80W
  • Insta-fire Speed: 0.001s
  • PULSE Mode
  • Zinc-Alloy Chassis Construction
  • Intuitive Firing Button
  • 96″” TFT Display Screen
  • Two Adjustment Buttons
  • 4mL Refillable Pod
  • Bottom Fill System – Silicone Stoppered
  • Vaporesso GTX Coil Series
  • 2ohm GTX Mesh Coil – rated for 45-60W
  • 3ohm GTX Mesh Coil – rated for 32-45W
  • Bottom Plug ‘n’ Play Coil Installation
  • Magnetic Pod Connection
  • MicroUSB Port
  • Available in Silver, Brown, Blue, Black, Green, Red

Vaporesso Target PM80 Kit Includes:

  •  Vaporesso Target PM80 Battery
  • 2 Vaporesso Target PM80 Pod
  •  0.2ohm GTX Mesh Coil
  •  0.3ohm GTX Mesh Coil
  •  USB Cable
  •  Warranty Card
  •  MicroUSB Cable
  •  Reminder Card

Vaporesso Target PM80 Pod Device Replacement Cartridges (Pack of 2)

Vaporesso put their best foot forward when they designed the Target.  It is compact, good-looking, yet powerful enough to appeal to both beginners and experienced vapers. The Target has a maximum output of 80 watts and is certainly in a different league than most “pod” systems on the current market. Yet, despite the power, the Target is still focused on providing a natural experience for Vapers, and a stylish, pocketable mod for those on the go.

Close up with the Vaporesso Target PM80 Pod Mod

The Target PM80 features a zinc-alloy chassis for sturdy and long-lasting life. It is incredibly versatile and lightweight, delivering sub-ohm status clouds of vapor, something we’ve missed sorely since the pod mod market began.  Using the AXON chipset, the Vaporesso Target PM80 Kit fires at speeds as low as 0.001s. 

Its fire button is oversized and very intuitive. There is a full panel of adjustment buttons at the bottom. Relaying crucial data on the 0.96″ TFT color screen, the Target PM80 Pod Mod Kit can be fully charged in an hour of less. The 4mL PM80 pod can be refilled by a bottom fill port, hidden by a silicone stopper.

The Vaporesso Target PM80 is a unique-looking hybrid.  It delivers on some really good ideas, and delivers a punchy, potent alternative to traditional pod systems and beginner vape rigs.

Though it’s not a pod mod in the traditional, “smoking-like” sense, and it can struggle with some coil and battery longevity issues, the Target PM80 still delivers an experience well above the garden-variety pod mods cluttering shelves across the world.

First, let’s take a look at the Specs;

SMOK RPM80 Pod Mod Kit Features:

  • IQ-80 Chipset
  • Dimensions – 109mm by 31.55mm by 26mm
  • Integrated 3000mAh Rechargeable Battery
  • Wattage Output Range: 1-80W
  • Voltage Output Range: 0.5-4.0V
  • Resistance Range: 0.15-3.0ohm
  • Zinc-Alloy Chassis Construction
  • Intuitive Firing Button
  • 96″” OLED Display Screen
  • Two Adjustment Buttons
  • SMOK RPM and RGC Pod & Coil Series
  • Side Refill System – Silicone Stoppered
  • 5mL Refillable RPM80 Pod
  • 4ohm RPM Mesh Coil
  • 5mL RPM80 RGC Pod
  • 17ohm RGC Conical Mesh Coil – rated for
  • 5-1.0ohm RGC RBA Coil – Coming Soon
  • Plug ‘n’ Play Coil Installation
  • Adjustable Airflow Control
  • Magnetic Pod Connection
  • Low Battery Protection
  • Short-Circuit Protection
  • 10S Cut-Off Protection
  • Over-heating Protection
  • Intelligent Atomizer Recognition
  • Puff Monitoring System
  • Bottom MicroUSB Type-C Port
  • Available in Black Stabwood, Red Stabwood, Fluid Gold, Fluid Blue, Black and White Resin, 7 Color, and Black Carbon Fiber

Includes:

  •  THE RPM80 Device
  •  ONE RPM80 RPM Pod
  •  RPM80 RGC Pod
  •  0.4ohm Mesh Coil
  •  0.17ohm Conical Mesh Coil
  •  MicroUSB Cable
  •  User Manual

SMOK RPM REPLACEMENT COILS

If you’ve seen the Stabilized Wood model of the RPM80 (stabwood), or the resin, or carbon fiber, then you know SMOK never has a problem with making every one of their products extraordinarily beautiful.

If there’s a luxury material used to make vape mods, it’s available on the SMOK RPM80. Each design, pattern, or color combination is remarkable. Some Vapers would prefer the stabwood options, others will go for a resin pattern, but no matter, SMOK is aiming the RPM series toward more mature attitudes, and away from their often-overdone 18650 mods.

The bold colors and contrasts, the flawless build quality and effortless operation, the RPM80 might just be the most attractive pod/AIO device on the market — a bold statement in a market usually dominated by the likes of Lost Vape. No matter which RPM80 you choose, you’re automatically getting something distinctive, tasteful and conversation worthy.

TFT Color Display

One of the nice carryovers from the previous RPM40 is the fantastic TFT color screen, which is vertically oriented and crams a ton of information and control options in full view.  SMOK has learned that “nicer” screens on their more powerful vape mods are vital to a successful launch, but for something as compact and pocket friendly as the RPM80, not a single ounce of the pod mod was wasted on non-essential real estate.

The simple menu system keeps the power controller front and center. This device is a straight up power mod, no temp control, no bypass, no passthrough, just a scaled back, potent pod mod that leaves the minutiae aside in favor of performance. By keeping those options away, the developers were allowed to focus on smart coil recognition and all the safety preventions we’ve come to expect from a modern device.

Both Pod Mod Kits are available now at EIGHTVAPE. Just pop over, choose your color or pattern, and wait for the vapemail. Being honest, both devices can use regular 70/30 and 50/50 e-liquids. We don’t like to encourage people to use nicotine salt e-liquids because of the heavy amount of nicotine found in nic-salts. Try some regular e-liquids, you’ll be surprised.

Let’s block ads! (Why?)

Source: Spinfuel.com